Optimisation of denaturing ion pair reversed phase HPLC for the purification of ssDNA in SELEX.

Aptamers have shown great promise as oligonucleotide-based affinity ligands for various medicinal and industrial applications. A critical step in the production of DNA aptamers via selective enhancement of ligands by exponential enrichment (SELEX) is the generation of ssDNA from dsDNA. There are a number of caveats associated with current methods for ssDNA generation, which can lower success rates of SELEX experiments. They often result in low yields thereby decreasing diversity or fail to eliminate parasitic PCR by-products leading to accumulation of by-products from round to round. Both contribute to the failure of SELEX protocols and therefore potentially limit the impact of aptamers compared to their peptide-based antibody counterparts. We have developed a novel method using ion pair reversed phase HPLC (IP RP HPLC) employed under denaturing conditions for the ssDNA re-generation stage of SELEX following PCR. We have utilised a range of 5' chemical modifications on PCR primers to amplify PCR fragments prior to separation and purification of the DNA strands using denaturing IP RP HPLC. We have optimised mobile phases to enable complete denaturation of the dsDNA at moderate temperatures that circumvents the requirement of high temperatures and results in separation of the ssDNA based on differences in their hydrophobicity. Validation of the ssDNA isolation and purity assessment was performed by interfacing the IP RP HPLC with mass spectrometry and fluorescence-based detection. The results show that using a 5' Texas Red modification on the reverse primer in the PCR stage enabled purification of the ssDNA from its complimentary strand via IP RP HPLC under denaturing conditions. Additionally, we have confirmed the purity of the ssDNA generated as well as the complete denaturation of the PCR product via the use of mass-spectrometry and fluorescence analysis therefore proving the selective elimination of PCR by-products and the unwanted complementary strand. Following lyophilisation, ssDNA yields of up to 80% were obtained. In comparison the streptavidin biotin affinity chromatography also generates pure ssDNA with a yield of 55%. The application of this method to rapidly generate and purify ssDNA of the correct size, offers the opportunity to improve the development of new aptamers via SELEX.

Detection of SARS-CoV-2 receptor binding domain using fluorescence probe and DNA flowers enabled by rolling circle amplification.

Using rolling circle amplification (RCA) and two different ways of signal readout, we developed analytical methods to detect the receptor-binding domain (RBD) of SARS-CoV-2 spike protein (S protein). We modified streptavidin-coated magnetic beads with an aptamer of RBD through a biotin-tagged complementary DNA strand (biotin-cDNA). Binding of RBD caused the aptamer to dissociate from the biotin-cDNA, making the cDNA available to initiate RCA on the magnetic beads. Detection of RBD was achieved using a dual signal output. For fluorescence signaling, the RCA products were mixed with a dsDNA probe labeled with fluorophore and quencher. Hybridization of the RCA products caused the dsDNA to separate and to emit fluorescence (λex = 488 nm, λem = 520 nm). To generate easily detectable UV-vis absorbance signal, the RCA amplification was extended to produce DNA flower to encapsulate horseradish peroxidase (HRP). The HRP-encapsulated DNA flower catalyzed a colorimetric reaction between H2O2 and 3,3',5,5'-tetramethylbenzidine (TMB) to generate an optical signal (λabs = 450 nm). The fluorescence and colorimetric assays for RBD have low detection limits (0.11 pg mL-1 and 0.904 pg mL-1) and a wide linear range (0.001-100 ng mL-1). For detection of RBD in human saliva, the recovery was 93.0-100% for the fluorescence assay and 87.2-107% for the colorimetric assay. By combining fluorescence and colorimetric detection with RCA, detection of the target RBD in human saliva was achieved with high sensitivity and selectivity.

An electrochemiluminescence aptasensor based on highly luminescent silver-based MOF and biotin-streptavidin system for mercury ion detection.

In this study, for the first time, a silver-based metal-organic framework (Ag-MOF) was synthesized and used as the electrochemiluminescence (ECL) emitter for building an ECL sensor. After modification with chitosan (CS) and gold nanoparticles (Au NPs), the ECL stability of Ag-MOF was improved. To detect mercury ions, a biosensor was constructed using the mercury ion aptamer and steric effect of streptavidin. First, the capture strand (cDNA) with terminal-modified sulfhydryl group was attached to the electrode surface by the Au-S bond. Then, the mercury-ion aptamer (Apt-Hg) modified with biotin was anchored to the electrode by complementary pairing with cDNA. Streptavidin (SA) could be fixed on the electrode by linking with biotin, thereby reducing the ECL signal. However, in the presence of mercury ions, the aptamer was removed and streptavidin could not be immobilized on the electrode. Hence, the ECL signal of the sensor increased with the concentration of mercury ions, which was linear in the range from 1 µM to 300 fM. The detection limit could reach 66 fM (S/N = 3). The sensor provided a new method for the detection of mercury ions.

Oligonucleotide-Blocked Streptavidin for Biotinylation Analysis.

Binding between streptavidin, or its homologues, to biotin is one of the most widely exploited biological interactions in the biomedical sciences. Controlling the extent of biotinylation is important for meeting the requirements of the intended design and to preserve the native function of the biotin recipient. Within the protein world, a"trial-and-error" optimization approach toward biotinylation reaction conditions is often necessary due to widely varying properties of proteins. Therefore, product analysis is important. We show here that a oligonucleotide-blocked streptavidin, effectively "monovalent streptavidin", can tag biotin moieties individually and the tagged products visualized via a polyacrylamide gel shift assay to reveal the product distribution, i.e., [protein-(biotin)n] products where n = 1, 2, 3, etc. This is in contrast, and complementary, to current commercially available analytical reagents for biotinylation characterization, which use an absorbance or fluorescence signal to yield the mean number of biotin moieties.

Immunoassay design and biotin interference.

Biotin (vitamin B7 or vitamin H), a member of vitamin B complex, acts as a cofactor for five biotin-dependent carboxylases, thus playing critical roles in gluconeogenesis, fatty acid synthesis and amino acid catabolism. Although rare inborn errors of metabolism may cause biotin deficiency, these can be successfully treated with biotin supplementation. In general, normal individuals do not get any benefit from taking biotin supplement. Nevertheless, biotin use remains widespread for growing healthy hair and nail. Unfortunately, the use/overuse of supplemental biotin may interfere with immunoassays that incorporate biotinylated antibody in assay design. Biotin if present in elevated concentration in serum or plasma, may falsely increase analyte concentration using competitive immunoassay (positive interference). In contrast, biotin shows negative interference if sandwich immunoassay format is used. Such interferences may cause diagnostic error, most commonly in cases of hyperthyroidism due to (1) positive interference of biotin in free triiodothyronine (FT3) and free thyroxine (FT4) assays (competitive format) and (2) negative interference in thyroid stimulating hormone (TSH) assay (sandwich format). In this review, I explore the biochemistry of biotin and discuss its role as a potential interferent in immunoassay formats that are biotin based.

Technical Note: Newly Reformulated Total and Free PSA Immunoassay on Cobas e411 Analyzer Is Virtually Free from Biotin Interference.

OBJECTIVE: Total and free prostate specific antigens (PSA) have been used as diagnostic markers for monitoring progress of therapy in patients with prostate cancer as well as for screening purpose. Roche total and free PSA immunoassay utilizes biotinylated antibody in assay design. As a result, both assays are affected by elevated serum biotin levels. Recently, Roche reformulated these assays to reduce biotin interference. We evaluated biotin interference in these products. MATERIALS AND METHODS: We prepared three serum pools with one pool containing high amount of total PSA. Then aliquots of each serum pool were further supplemented with various concentrations of biotin (100-1500 ng/mL) followed by measuring both total and free PSA using Roche total and free PSA immunoassay and Cobas e411 analyzer. RESULTS: We observed no significant interference of biotin in both total and free PSA assays up to biotin concentration of 1200 ng/mL. CONCLUSION: We concluded that newly reformulated total and free PSA immunoassays are virtually free from biotin interference.

Functionalization of Water-Soluble Conjugated Polymers for Bioapplications.

Water-soluble conjugated polymers (WS-CPs) have found widespread use in bioapplications ranging from in vitro optical sensing to in vivo phototherapy. Modification of WS-CPs with specific molecular functional units is necessary to enable them to interact with biological targets. These targets include proteins, nucleic acids, antibodies, cells, and intracellular components. WS-CPs have been modified with covalently linked sugars, peptides, nucleic acids, biotin, proteins, and other biorecognition elements. The objective of this article is to comprehensively review the various synthetic chemistries that have been used to covalently link biofunctional groups onto WS-CP platforms. These chemistries include amidation, nucleophilic substitution, Click reactions, and conjugate addition. Different types of WS-CP backbones have been used as platforms including poly(fluorene), poly(phenylene ethynylene), polythiophene, poly(phenylenevinylene), and others. Example applications of biofunctionalized WS-CPs are also reviewed. These include examples of protein sensing, flow cytometry labeling, and cancer therapy. The major challenges and future development of functionalized conjugated polymers are also discussed.

A novel click chemistry-based peptide ELISA protocol: development and technical evaluation.

ELISA is the current standard for (auto)antibody diagnostics. Once established, ELISA protocols can be easily adapted for novel antigens; however, peptide-based protocols are rarely available. Herein the authors describe the results of a technical investigation of an indirect ELISA protocol using peptides conjugated onto a protein carrier based on click chemistry and immobilized in standard plastics. The authors compared this approach with the common biotin-avidin system and obtained a slightly improved limit of detection for purified IgG of 25-100 ng/well compared with 25-1000 ng/well. Reproducibility and stability of the methodological approach were conducted for further technical characterization. Indirect ELISA using immunoreactive peptides conjugated to bovine serum albumin offers a reliable method that is complementary to standard plastics and plate readers.

Understanding the structure and composition of recalcitrant oligosaccharides in hydrolysate using high-throughput biotin-based glycome profiling and mass spectrometry.

Novel Immunological and Mass Spectrometry Methods for Comprehensive Analysis of Recalcitrant Oligosaccharides in AFEX Pretreated Corn Stover. Lignocellulosic biomass is a sustainable alternative to fossil fuel and is extensively used for developing bio-based technologies to produce products such as food, feed, fuel, and chemicals. The key to these technologies is to develop cost competitive processes to convert complex carbohydrates present in plant cell wall to simple sugars such as glucose, xylose, and arabinose. Since lignocellulosic biomass is highly recalcitrant, it must undergo a combination of thermochemical treatment such as Ammonia Fiber Expansion (AFEX), dilute acid (DA), Ionic Liquid (IL) and biological treatment such as enzyme hydrolysis and microbial fermentation to produce desired products. However, when using commercial fungal enzymes during hydrolysis, only 75-85% of the soluble sugars generated are monomeric sugars, while the remaining 15-25% are soluble recalcitrant oligosaccharides that cannot be easily utilized by microorganisms. Previously, we successfully separated and purified the soluble recalcitrant oligosaccharides using a combination of charcoal and celite-based separation followed by size exclusion chromatography and studies their inhibitory properties on enzymes. We discovered that the oligosaccharides with higher degree of polymerization (DP) containing methylated uronic acid substitutions were more recalcitrant towards commercial enzyme mixtures than lower DP and neutral oligosaccharides. Here, we report the use of several complementary techniques that include glycome profiling using plant biomass glycan specific monoclonal antibodies (mAbs) to characterize sugar linkages in plant cell walls and enzymatic hydrolysate, matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) using structurally-informative diagnostic peaks offered by negative ion post-secondary decay spectra, gas chromatography followed by mass spectrometry (GC-MS) to characterize oligosaccharide sugar linkages with and without derivatization. Since oligosaccharides (DP 4-20) are small, it is challenging to mobilize these molecules for mAbs binding and characterization. To overcome this problem, we have applied a new biotin-coupling based oligosaccharide immobilization method that successfully tagged most of the low DP soluble oligosaccharides on to a micro-plate surface followed by specific linkage analysis using mAbs in a high-throughput system. This new approach will help develop more advanced versions of future high throughput glycome profiling methods that can be used to separate and characterize oligosaccharides present in biomarkers for diagnostic applications.

Specific and sensitive detection of Influenza A virus using a biotin-coated nanoparticle enhanced immunomagnetic assay.

This study reports the development of a sensitive magnetic bead-based enzyme-linked immunoassay (MELISA) for the pan-reactive detection of the Influenza A virus. The assay combines immunomagnetic beads and biotin-nanoparticle-based detection to quantify a highly conserved viral nucleoprotein in virus lysates. At the capture step, monoclonal antibody-coated magnetic microbeads were used to bind and concentrate the nucleoprotein in samples. The colorimetric detection signal was amplified using biotinylated silica nanoparticles (NP). These nanoparticles were functionalized on the surface with short DNA spacers bearing biotin groups by an automated supported synthesis method performed on nano-on-micro assemblies with a DNA/RNA synthesizer. A biotin-nanoparticle and immunomagnetic bead-based assay was developed. We succeeded in detecting Influenza A viruses directly in the lysis buffer supplemented with 10% saliva to simulate the clinical context. The biotin-nanoparticle amplification step enabled detection limits as low as 3 × 103 PFU mL-1 and 4 × 104 PFU mL-1 to be achieved for the H1N1 and H3N2 strains respectively. In contrast, a classical ELISA test based on the same antibody sandwich showed detection limit of 1.2 × 107 PFU mL-1 for H1N1. The new enhanced MELISA proved to be specific, as no cross-reactivity was found with a porcine respiratory virus (PRRSV). Graphical abstract.

DNA building blocks for AFM tip functionalization: An easy, fast and stable strategy.

Biosensing atomic force microscopy (AFM) offers the unique feature to determine the energy landscape of a bimolecular interaction at the real single molecule level. Furthermore, simultaneous and label-free mapping of molecular recognition and the determination of sample topography at the nanoscale gets possible. A prerequisite and one of the major parts in biosensing AFM are the bio-functionalized AFM tips. In the past decades, different approaches for tip functionalization have been developed. Using these functionalization strategies, several biological highly relevant interactions at the single molecule level have been explored. For the most common approach, the use of a heterobifunctional poly(ethylenglycol) crosslinker, a broad range of linkers for different chemical coupling strategies is available. Nonetheless, the time consuming functionalization protocol as well as the broad distribution of rupture length reduces the possibility of automation and may reduce the accuracy of the results. Here we present a stable and fast forward approach based on tetra-functional DNA tetrahedra. A fast functionalization and a sharp defined distribution of rupture length gets possible with low effort and high success rate. We tested the performance on the classical avidin biotin system by using tetrahedra with three disulfide legs for stable and site directed coupling to gold coated tips and a biotinylated end at the fourth vertex. A special advantage appears when working with a DNA aptamer as sensing molecule. In this case, the fourth strand can be extended by a certain DNA sequence complementary to the linkage part of an aptamer. This AFM tip functionalization protocol was applied on thrombin using DNA aptamers directed against the fibrinogen binding side of human thrombin.

Mass Spectrometry-Cleavable Protein N-Terminal Tagging Strategy for System-Level Protease Activity Profiling.

Proteolysis is one of the most important protein post-translational modifications (PTMs) that influences the functions, activities, and structures of nearly all proteins during their lifetime. To facilitate the targeted identification of low-abundant proteolytic products, we devised a strategy incorporating a novel biotinylated reagent PFP (pentafluorophenyl)-Rink-biotin to specifically target, enrich and identify proteolytic N-termini. Within the PFP-Rink-biotin reagent, a mass spectrometry (MS)-cleavable feature was designed to assist in the unambiguous confirmation of the enriched proteolytic N-termini. The proof-of-concept study was performed with multiple standard proteins whose N-termini were successfully modified, enriched and identified by a signature ion (SI) in the MS/MS fragmentation, along with the determination of N-terminal peptide sequences by multistage tandem MS of the complementary fragment generated after the cleavage of MS-cleavable bond. For large-scale application, the enrichment and identification of protein N-termini from Escherichia coli cells were demonstrated, facilitated by an in-house developed NTermFinder bioinformatics workflow. We believe this approach will be beneficial in improving the confidence of identifying proteolytic substrates in a native cellular environment.

The biotin interference within interference suppressed immunoassays.

BACKGROUND: Reports of false laboratory findings due to a biotin supplementation have raised concerns about the safety of immunoassays. According to current research, biotin is known to cause interference in immunoassays. Since up to 70% of medical decisions are based on laboratory results and the significantly increased intake of biotin supplements in the recent years, the reliability of immunoassays is essential. METHODS: To evaluate this reliability two experiments were conducted. In the first experiment 59 interference suppressed immunoassays of the manufacturer Roche Diagnostics were examined regarding their sensitivity to a biotin interference. In the second experiment the pharmacokinetic of biotin was examined by supplementing volunteers with biotin. RESULTS: A combination of the results of both experiments suggests that a biotin interference in laboratory findings is probable. Contrary to the current state of research on sandwich immunoassays, falsely elevated test results occur more frequently than falsely low results. CONCLUSION: The interference suppressed immunoassays have shown in the experiment that they are susceptible to a biotin interference. Therefore, laboratory institutions, medical staff and patients must be aware of the possibility of a biotin interference. As a result, Roche Diagnostics may consider reviewing the interference suppression and their indications of the tests.

Toxicologic evaluation of a novel, highly soluble biotin salt, magnesium biotinate.

A novel, highly soluble biotin salt, magnesium biotinate (MgB), was assessed for general and genetic toxicity using several toxicologic tests. This battery of tests included in vitro bacterial reverse mutation test, in vitro mammalian micronucleus assay, and oral acute, 14-day, and 90-day repeat-dose toxicity in Sprague-Dawley (SD) rats. The results of the in vitro studies indicate that MgB is not mutagenic, clastogenic, or aneugenic. The acute oral toxicity study established an LD50 ≥ 5000 mg MgB/kg. In the 14-day oral toxicity study, doses of MgB up to 2500 mg MgB/kg/day produced no clinical signs or mortality. In the 90-day oral toxicity study, administration of 600 mg MgB/kg/day resulted in no clinical signs and was determined to be the no-observed-adverse-effect-level (NOAEL), which equates to 39 g biotin/day for a 70 kg human. Since MgB is composed of 93% biotin, the 600 mg NOAEL equates to approximately 1.3 million times the current recommended daily allowance of 30 µg biotin/day and 3900 times supplement levels of 10 mg biotin/day. Based on the toxicologic profile and lack of findings in various in vitro and in vivo studies, MgB may be considered safe for long-term human use.

Cell type-selective secretome profiling in vivo.

Secreted polypeptides are a fundamental axis of intercellular and endocrine communication. However, a global understanding of the composition and dynamics of cellular secretomes in intact mammalian organisms has been lacking. Here, we introduce a proximity biotinylation strategy that enables labeling, detection and enrichment of secreted polypeptides in a cell type-selective manner in mice. We generate a proteomic atlas of hepatocyte, myocyte, pericyte and myeloid cell secretomes by direct purification of biotinylated secreted proteins from blood plasma. Our secretome dataset validates known cell type-protein pairs, reveals secreted polypeptides that distinguish between cell types and identifies new cellular sources for classical plasma proteins. Lastly, we uncover a dynamic and previously undescribed nutrient-dependent reprogramming of the hepatocyte secretome characterized by the increased unconventional secretion of the cytosolic enzyme betaine-homocysteine S-methyltransferase (BHMT). This secretome profiling strategy enables dynamic and cell type-specific dissection of the plasma proteome and the secreted polypeptides that mediate intercellular signaling.

The maturation of DNA encoded libraries: opportunities for new users.

DNA-encoded combinatorial libraries (DECLs) represent an exciting new technology for high-throughput screening, significantly increasing its capacity and cost-effectiveness. Historically, DECLs have been the domain of specialized academic groups and industry; however, there has recently been a shift toward more drug discovery academic centers and institutes adopting this technology. Key to this development has been the simplification, characterization and standardization of various DECL subprotocols, such as library design, affinity screening and data analysis of hits. This review examines the feasibility of implementing DECL screening technology as a first-time user, particularly in academia, exploring the some important considerations for this, and outlines some applications of the technology that academia could contribute to the field.

Functionalization of hybrid surface microparticles for in vitro cellular antigen classification.

Hybrid material surfaces on microparticles are emerging as vehicles for many biomedical multiplexing applications. Functionalization of these hybrid surface microparticles to biomolecules presents unique challenges related to optimization of surface chemistries including uniformity, repeatability, and sample sparring. Hybrid interfaces between microlevel surfaces and individual biomolecules will provide different microenvironments impacting the surface functionalization optimization and efficiency. Here, we propose and validate the first demonstration of streptavidin adsorption-based antibody functionalization on unmodified, hybrid surface microparticles for in vitro analysis. We test this analytical technique and fabricate hybrid surface microparticles with a polystyrene core and aluminum oxide semi-coating. Additionally, we optimize the streptavidin-biotin functionalization chemistry in both assay implementation and sample sparring via analytical mass balances for these microparticles and subsequently conjugate anti-human CD11b antibodies. Result confirmation and characterization occurs from ultraviolet protein absorbance and ImageJ processing of fluorescence microscopy images. Additionally, we design and implement the multi-sectional imaging (MSI) approach to support functionalization uniformity on the hybrid surface microparticles. Finally, as a proof-of-concept performance, we validate anti-CD11b antibodies functionalization by visualizing hybrid surface microparticles conjugate to human neutrophils isolated from blood samples collected from potentially septic patients. Our study introduces and defines a category of functionalization for hybrid surface microparticles with the intent of minuscule sample volumes, low cost, and low environmental impact to be used for many cellular or proteomic in vitro multiplexing applications in the future. Graphical abstract.

Targeted copper supplementation oriented theranostic for fluorescence and 19F NMR detection of tumors.

Alteration of the levels of copper is a promising approach for cancer therapy. Herein, we develop a dual-mode copper vehicle, M985. The biotin-tailed M985 can exert tumor-directed copper supplementation and undergo self-immolative cleavage in living cancerous cells, resulting in the liberation of F542 along with the generation of excess reactive oxygen species. Thus, fluorescence and 19F NMR detection is realized to specifically discriminate cancer cells. F542 acts as a fluorescence reporter and a potent cytotoxic agent, facilitating the visualization of molecular release and distribution, as well as confirming the ER autophagy-induced apoptosis. Therefore, we present a promising dual-mode theranostic M985 for the efficient detection and therapy of cancer.

Celastrol inhibits ezrin-mediated migration of hepatocellular carcinoma cells.

Progression of hepatocellular carcinoma involves multiple genetic and epigenetic alterations that promote cancer invasion and metastasis. Our recent study revealed that hyperphosphorylation of ezrin promotes intrahepatic metastasis in vivo and cell migration in vitro. Celastrol is a natural product from traditional Chinese medicine which has been used in treating liver cancer. However, the mechanism of action underlying celastrol treatment was less clear. Here we show that ROCK2 is a novel target of celastrol and inhibition of ROCK2 suppresses elicited ezrin activation and liver cancer cell migration. Using cell monolayer wound healing, we carried out a phenotype-based screen of natural products and discovered the efficacy of celastrol in inhibiting cell migration. The molecular target of celastrol was identified as ROCK2 using celastrol affinity pull-down assay. Our molecular docking analyses indicated celastrol binds to the active site of ROCK2 kinase. Mechanistically, celastrol inhibits the ROCK2-mediated phosphorylation of ezrin at Thr567 which harnesses liver cancer cell migration. Our findings suggest that targeting ROCK2-ezrin signaling is a potential therapeutic niche for celastrol-based intervention of cancer progression in hepatocellular carcinoma.

Plasmonic Biosensing with Aluminum Thin Films under the Kretschmann Configuration.

Aluminum has recently attracted considerable interest as a plasmonic material due to its unique optical properties, but most work has been limited to nanostructures. We report here SPR biosensing with aluminum thin-films using the standard Kretschmann configuration that has previously been dominated by gold films. Electron-beam physical vapor deposition (EBPVD)-prepared Al films oxidize in air to form a nanofilm of Al2O3, yielding robust stability for sensing applications in buffered solutions. FDTD simulations revealed a sharp plasmonic dip in the visible range that enables measurement of both angular shift and reflection intensity change at a fixed angle. Bulk and surface tests indicated that Al films exhibited superb sensitivity performance in both categories. Compared to Au, the Al/Al2O3 layer showed a marked effect of suppressing nonspecific binding from proteins in human serum. Further characterization indicated that Al film demonstrated a higher sensitivity and a wider working range than Au films when used for SPR imaging analysis. Combined with its economic and manufacturing benefits, the Al thin-film has the potential to become a highly advantageous plasmonic substrate to meet a wide range of biosensing needs in SPR configurations.